Great news, the advantages of SUP706 soluble support are now available on the Stratasys J750 and Objet30 (V3) Printer family, including the Objet30 Basic, Objet30 Pro, and Objet30 Prime.  With the new addition of this soluble support material you can experience:

  • Freedom of design; easily print and clean parts with:
    • Intricate, delicate features
    • Fine details and interior cavities
    • Internal voids and undercuts
  • Significantly improved print process productivity
  • Efficiently clean many small parts at once
  • Reduce time and labor in the post-processing of support removal
  • Quicker and easier support removal using the WaterJet cleaning station

Click through the pictures on the left to see parts printed and cleaned using SUP706 soluble support material. Request More Information >>

SUP706 Soluble Support Removal Process

SUP706 gives you three ways to remove your support material.  Hands-free, peel and soak, or using the WaterJet.

Hands-Free: Minimal Cost Per Part

  1. Place part in cleaning solution tank for 2 to 24 hours (depending on geometry)
  2. After support is removed, rinse off any residue

Peel & Soak:

  1. Quickly removal most of the support manually (1 to 2 minutes per part)
  2. Place part in cleaning solution tank for 1 to 4 hours (depending on geometry)
  3. After support is removed, rinse off any residue

WaterJet: Fastest Time Per Part

  1. Use the WaterJet to remove the support material.  SUP706 is faster and easier to remove when compared to SUP705.

Watch the above quick video to see the three support removal methods in action.


Q: Can I update my current Objet30 (Basic/Pro/Prime) to run SUP706 soluble support?  
A: YES – as long as it is a V3.  V2s are not eligible to update at this time.

Q: How much is the cost to update my machine?  
A: The update is FREE, there is not cost to update your machine to run SUP706.  You will need to purchase a DT3 cleaning tank in order to take advantage of the hands-free or peel & soak support removal methods.

Q: What is the update process for my Objet30 V3 machine?
A: This is a self-install update, done by the end user.  It requires only a software update for the printer and Objet Studio software.  Contact us at 866.499.7500 or if you would like to request your software update.

Q: What is the price of SUP706?
A: Same as SUP705, there is no price increase

Q: Can SUP705 still be used after the update is performed? 
A: Yes

Q: How do I purchase a DT3 cleaning tank to use with SUP706
A: Engatech can assist with the purchase of a DT3 cleaning tank.  Contact us today and we will get you a quote.

Send a message
Sorry! We aren't around right now. Leave a message and we'll get back to you, asap.
Your name
* Email
* Describe your issue
Login Chat
Questions? We're here. Send us a message!
Your name
* Email
We're online!